CAMPULES: Load correct shade onto applicator. Please ensure that the tip is securely inserted. By firm pressure extrude composites directly into cavity, taking care to fill from the base upward avoiding any voids. Fill in increments of 3mm and light cure before adding the next layer.
CURE OF LC COMPOSITES: Each surface of restoration should be exposed for at least 10 seconds and additional curing should be carried out buckle and lingual walls. Where pins are in position, it is useful to cure the material around them first and then re-pack the rest. Use cellophane strip, celluloid crowns and celluloid cervical matrix to hold the restoration and cure through these.
CONTOUR POLISHING/FINISHING: The restoration is easily contoured by fine fast diamond burs. Composite finishing stones should be used to return the surface to a smooth finish. The polishing is carried out by using polishing strips, disc with fine grit Xcem‘s Prophy Paste.
Final gloss and seal is achieved by panting glaze onto the restoration.
STORAGE: Do not store above 23° C.
Always replace cap after use. Protect from heat and light.
CAUTION: MEGA X contains resins and diluent ionomer from methylate family. Skin allergy although rare, is a possibility in some individuals. If imitation suspected, remove composite from skin and wash thoroughly with soap and water.
Do not contact with eyes, if contact occurs wash immediately with plenty of water.
CAMPULES: Please apply controlled pressure to extrude composite.
Always ensure the capsule tip is correctly seated.
If allergy occurs discontinue the use.
