X-TEMP LC 2 X 2GM

INDICATION: X-Temp LC is a light curing material for temporary filling and sealing. Elastic nature in set material assures an easy removal, even in the case of undercuts, finishing the cavity is not necessary. It can also be used as temporary restorative material.

CONTRAINDICATION:  In rare cases (delayed and long term) product may cause hypersensitivity or allergy in some people. If such reactions are experienced, discontinue use of the product and refer to physician.

INSTRUCTIONS FOR USE: Preparation, lining and impression is to be carried out as usual. Rinse and dry the cavity.

Apply X-Temp LC into the cavity with a suitable instrument. (Round condenser or spatula).

Cure for 20-40s (dependant on layer thickness) with a conventional poly-merization device. For guidance 5mm deep layer is cured sufficiently in 40s. Increased exposure time is required when the light source cannot be brought close enough to the material. Check occlusion, excess can be removed with a scalpel.

APPLICATION OF X-TEMP AS TEMPORARY RESTORATIVE MATERIALS (SECONDARY USE):

Take the material out of syringe and fill the prepared retentive cavity. Use the spatula or probe for applying the material on the right place. Take care to fill from base upwards avoiding any voids. Fill in increments of 3mm and light cure before adding the next layer. If allergy occurs discontinue use and consult your health professional.

REMOVAL OF A TEMPORARY FILLING: Insert the rigid instrument into the temporary filling and extract it.

CAUTION: Adhesion to the dental resin or linings (e.g. light curing materials) may occur. In such cases, apply a suitable insulating agent. (e.g Glycerine, Vaseline) Avoid use of lining material containing Eugenol because it will change the setting time of X-Temp LC. Slight expansion of X-Temp LC ensures the tight seal of the temporary restoration.

CONTENTS: See outer pack markings for detail of pack size and contents.

Our preparations have been developed for use in dentistry. As far as the application of the products delivered by us is concerned, our verbal and/or written information has been given to the best of our knowledge and with-out obligation. Our information and/or advice do not relieve you from examining the materials delivered by us as to their suitability for the intended purposes of application. As the application of our preparations is beyond our control, the user is fully responsible for the application. Of course, we guarantee the quality of our preparations in accordance with the existing standards and corresponding to the conditions as stipulated in our general terms of sale and delivery.