Xcem offers a convenient and ready to use Trycem, for quick temporary cementation of crowns and bridges. The composition is based on Zinc oxide/eugenol system.
INDICATIONS
For temporary cementation of crowns, Bridges and inlays etc.
Also useful as temporary material. May be used to find high spot on dentures.
Zinc oxide – eugenol paste/catalyst system for temporary cementation of crowns and bridges.
Base: 3ml Paste Catalyst: 3ml
Paste Recappable tips & Mixing Pad
READY TO USE
Working time : 2 minute
Set time : 3.5 minute from start of mix.
Xcem offers a convenient and ready to use Trycem, for quick temporary cementation of crowns and bridges.
The composition is based on Zinc oxide/eugenol system.
INDICATIONS: For temporary cementation of crowns, Bridges and inlays etc. Also useful as temporary material.
May be used to find high spot on dentures.
PRESENTATION:
Base: 3ml Paste
Catalyst: 3ml Paste
Recappable tips.
Mixing Pad
READY TO USE: Working time: 2 minutes.
SET TIME: 3.5minutes from start of mix.
HOW TO USE: Dry the crown and load fitting surface with Trycem as required and fit on tooth. Trim excess.
The eugenol component has a soothing effect on pulp.
Trycem has a very low film thickness; therefore it is an ideal cement for allowing complex crowns and bridges to allow settle onto teeth.
Spatula and instruments should be wiped clean before setting.
Spillages must be cleaned immediately.
In case of contact with skin, wash with plenty of water.
If contact occurs with eyes use eye washer if necessary.
Medical advice may be sought if necessary.
Please do not use Trycem under composite restorations as it Retards setting.
STORAGE: Store at normal room temperature in sealed form.
