Xcem Is pleased to present a dedicated microglass ionomer product for restoration of children’s teeth.Apart from chemical adhesion and biocompatibility, the product has a risk snap set and high fluoride release.Pricare is also recommended as a pedodontic product where dental caries could not be removed affectively and yet some arrest of carious process is desired.
INDICATIONS:
Permanent restoration of deciduous teeth. Semi permanent restoration of teeth in cases of rampant caries and where all dental could not be removed due to equipment and personal limitations. Also useful for cementation of crowns and bridges and ortho bands. For immediate restoration of traumatized teeth.
PRESENTATION:
20gm powder
9ml liquid
MIXING:
2DROPS LIQUID
3SCOOPS POWDER
MIXING TIME: 30SEC
WORKING TIME: 2MIN
SET TIME: 3.5MIN FROM START OF MIX.
Invert powder bottle a few times to fluff up powder. Level fill powder scoop without compressing powder. Always replace lid on bottle after use .Liquid bottle should be inverted and squeezed to give required drops of liquid on to mixing pads. Always replace lid immediately as liquid may dry if let on bench without lid this can cause blockage of liquid nipple. Initially add first heap of powder and mix to homogenous paste by using metal spatula. Add rest of powder incrementally until required consistency. The mixed material should have a glossy surface and is ready for use immediately.
HOW TO USE:
CAVITY PREPARATION:
Minimal cavity prep is required. Enamel should be preserved even if it undercut. If the cavity is very deep and there is almost risk of pulp exposure, a calcium hydroxide liner such as PULPCAL is recommended.
Following cavity preparation: Isolate tooth and dry the cavity .Fill cavity with mixed pricare.taking care thoroughly until cavity is overfilled. Pack as necessary and contour before the Pricare begins to form a rubbery set stage .Trim away excess and cover with varnish immediately .Pricare will set rapidly. Further adjustments to the restoration can be carried out after 4min of mixing. Use fine grit stone to relive occlusal surface and cover with varnish. For Class III and Class II, use of celluloid Type strip matrix is recommended for excellent adaptation and surface finish.
Pricare is also useful as fissure sealant where minimal fissure clearance have been carried by inverted cone bur.
Where it is not possible remove all dental decay. Use of glass ionomer may be advantageous as a semi permanent restoration.
CAUTION:
Liquid is adhesive and contains polyacrylic acid. Spatula and instruments should be wiped clean before setting. Spillages should be cleaned immediately. In case skin contact, wash with plenty of water and use eye washes as necessary. Medical advice may be sought.
POWDER:
Very fine powder may give rise to dust; however, small it is recommended that lid shelled be replaced immediately after use.
STORAGE:
Store at normal room temperature in sealed from.
