AQUAPOL is fine polycarboxylate aqua-set luting cement. Excellent product for where teeth are very extremely sensitive. AQUAPOL can be used as Permanent cement for crowns, veneers, bridges and inlays & onlays, to orthodontic brackets and cavity linings for all types of fillings. AQUAPOL can also be used as Temporary filling for deciduous teeth
- Gentle to pulp
- Appropriate setting time
- Easy to use
- Easy to mix
- High Compressive strength
- Appropriate working time
- Make strong bond to tooth structure
Shake the bottle before use as contents tend to settle, use level scoops of powder. Half fill the water bottle with distilled water and hold downwards to allow dispensing of equal sized drops.
Conditions of mixing:
Mix on the mixing pad supplied or clean glass slab with a stainless steel spatula. It should be kept at a temperature of 23oC, 50% relative humidity.
Higher temperature can accelerate the working & setting time and vice versa.
Mixing ratio
Cementation
2 scoops powder + 6 drops of water (equivalent to 3.5 – 3.65g powder per 1.0g water)
Lining:
2 scoops powder + 4 drops of water (equivalent to 5.0 – 5.2 g powder per 1.0g water)
Mixing times:
| Mix Time |
Working Time |
Setting time |
Total time |
|
15 sec |
2.0 mins |
1 min 45 sec |
4 mins |
Directions for use
Place first scoop of powder on mixing pad and work into the water, when completely wet add second scoop and mix to a creamy smooth consistency for cementation or a smooth paste for lining purposes. The cement should be applied as soon as it looks glossy on a clean dry restoration then subsequently on to dry prepared tooth. Any excess cement should be trimmed away just prior to final set at rubbery stage.
